Job Descriptions and Careers, Career and Job Opportunities, Career Search, and Career Choices and Profiles » Construction & Skilled Trades

Construction Electrician Job Description, Career as a Construction Electrician, Salary, Employment - Definition and Nature of the Work, Education and Training Requirements, Getting the Job

electricians electrical wiring jobs

Education and Training: Apprenticeship or on-the-job training

Salary: Median—$20.33 an hour

Employment Outlook: Good

Definition and Nature of the Work

Construction electricians assemble, install, and wire the electrical systems in new homes and buildings. Light, heat, power, air-conditioning, and refrigeration operate through electrical systems. Electricians usually install the wiring after the building is partially built. They follow blueprints and wiring diagrams. They also install electronic equipment and signal communication systems.

When electricians wire new homes or buildings, they first run conduit, which is metal tubing or pipe, inside walls and ceilings. They must cut the conduit to the proper length. Once the conduit is in place, electricians pull the wires through the tubing. To complete the circuit, they attach these wires to switches and outlets. Then they solder or screw wires to the fuse box, circuit breakers, or transformers. For safety reasons, electricians must follow state, county, and municipal codes in wiring.

Electricians use hand tools including screwdrivers, pliers, knives, and hacksaws. Employers usually supply conduit benders, pipe threaders, power tools, and test meters.

Education and Training Requirements

Some electricians learn the trade by working as helpers to qualified electricians. Others enter a formal apprenticeship program, which requires a high school diploma. One of the best ways to get formal training is through the four-year apprenticeship program developed by the International Brotherhood of Electrical Workers and the National Electrical Contractors Association. The committee overseeing apprenticeships decides how many apprentice electricians are needed in any given area. It also establishes apprenticeship standards and plans a varied work program that gives trainees the opportunity to work with different contractors.

Along with four years of on-the-job training, apprentices receive at least 144 hours of classroom instruction each year. In the classroom, apprentices learn applied mathematics, wiring layout, electrical theory, electronics, and blueprint reading. Many experienced electricians also take classroom instruction to keep up with new developments in this field.

An electrician usually installs the electrical wiring when the building is partially completed. (© Gaetano/Corbis.)

In most areas, electricians need a master electrician's license. The licenses are awarded after applicants pass a test on their knowledge of the trade, the National Electric Code, and the state, local, and municipal building and electrical codes.

Getting the Job

The best way to enter this field is through the joint union-management apprenticeship program. It is also possible to apply directly to electrical contractors for work as a helper.

Advancement Possibilities and Employment Outlook

Experienced electricians often advance to become superintendents or supervisors of construction jobs. Some electricians become estimators, who calculate the length of time a project will take, as well as the labor and materials costs, and submit bids for jobs. Construction electricians can transfer to related jobs, such as maintenance electricians in factories or electricians for aircraft or shipbuilding companies. They can also start their own contracting businesses.

About 659,000 electricians are employed in the United States, of which about two-thirds are in construction-related jobs. This figure is expected to grow about as fast as the average for all jobs. However, the outlook for highly skilled electricians is very good through 2014. The sophisticated wiring in computers and electronic devices will provide more jobs for electricians in the future. More electricians will also be needed to install and repair communication devices used in commerce and industry. Of course, opportunities in the construction industry depend on the strength of the economy.

Working Conditions

Electricians generally work forty hours per week, with extra wages for overtime work. Generally they work indoors, but they may be exposed to the elements while working in partially built structures. They often stand for many hours at a time on ladders and scaffolding, or kneel in tight quarters. The risk of electrical shock is always present, although it has been lessened by strict safety procedures. Many electricians belong to labor unions.

Where to Go for More Information

International Brotherhood of Electrical Workers
900 Seventh St. NW
Washington, DC 20001
(202) 833-7000

National Electrical Contractors Association
3 Bethesda Metro Center, Ste. 1100
Bethesda, MD 20814-5330
(301) 657-3110

Independent Electrical Contractors
4401 Ford Ave., Ste. 1100
Alexandria, VA 22302
(800) 456-4324

Earnings and Benefits

Median earnings for electricians in 2004 were $20.33 per hour. Apprentices receive forty to fifty percent of the experienced electrician's wage at the start of their training. The wages increase periodically until the end of the apprenticeship. Union workers generally receive paid vacations and pension plans.

Construction Equipment Dealer Job Description, Career as a Construction Equipment Dealer, Salary, Employment - Definition and Nature of the Work, Education and Training Requirements, Getting the Job [next] [back] Civil Engineering Technician Job Description, Career as a Civil Engineering Technician, Salary, Employment - Definition and Nature of the Work, Education and Training Requirements, Getting the Job

User Comments

Your email address will be altered so spam harvesting bots can't read it easily.
Hide my email completely instead?

Cancel or

Vote down Vote up

11 months ago

sunt electrician construction si am o experiens 28 yars

Vote down Vote up

almost 6 years ago

•Erection of Trafo's up to 15 MVA 132 KV,CTs,PTs,Isolators,steel structures for equipments and Gantrees. LAs,OLTCs, RTCCs, HT Panels,LT Panels,APFC stringing of ACSR conductors,Installation of Tubular bus bars,Erection Of Cable Trays, Laying of control&Power cables, Telecom,CCTV,Fire alarm cables etc.
•Lineman in all distribution line in Electrical Project occupying Gizan area in Kingdom of Saudi Arabia.
•Overhead Construction of 13.8kVA up to 33kVA erecting poles,dressing and stringing.
•Installing and wiring of transformer and breaker.
•Repairing underground cable of 13.8kVa.
•Plans and supervises the work of skilled Electricians performing electrical installation,
maintenance, and repair work on high and low voltage
•Locates and repairs defects in electrical systems,which involves the performance of difficult electrical tasks;
•Estimates supplies and materials needed by Electricians and requests that they be ordered;
•Reviews for accuracy the written work of others,such as time cards, mileage sheets,and work reports;
•Reviews and updates maintenance procedures of Electricians, making recommendations for improvements;
•Inspects facilities and installations and recommends alterations or revisions;
•Remains aware of changes in the fields by reading,attending training, actively participating in the day-to-day activities on the job,etc.
•Demonstrates continuous effort to improve operations,decrease turnaround times,streamline work processes,and work cooperatively and jointly to provide quality seamless customer service.
•Electrical construction and maintenance practices.
•Procedures for installing all sizes of electrical conduit, cables, wires, switches, automatic stating equipment, and pole line construction, etc.
•Standard practices, materials,and tools of the electrical trade.
•Mitigate hazards and apply precautionary methods peculiar to the trade.
•Apply electrical code applicable to installation,maintenance,and repair work